2. /
  3. Products
  4. /
  5. Parker products
  6. /
  7. Pneumatic
  8. /
  9. Mini ISO pneumatic cylinders - Parker P1A series

MINI ISO PNEUMATIC CYLINDER - PARKER P1A SERIES
p1a

Parker Hannifin

- International standards: ISO 6432 compliant
- Sizes: Ø10, Ø12, Ø16, Ø20 and Ø25mm
- Stroke length: 5 to 1000 mm
- Versions :
- Double effect
- double-acting with through rod
- single-acting, spring return
- single acting, feed spring
- Amortization :
- fixed elastic damping Ø12, Ø16, Ø20 and Ø25mm
- fixed pneumatic damping Ø16, Ø20 and Ø25mm
- Position sensor: cylinders for the standard temperature range are fitted with a magnet for proximity position detection. An optional bracket fixed securely along the cylinder tube allows the mounting of electronic or reed-type sensors, which can be supplied either with a flying lead or a connector. The high-temperature version does not have a magnetic ring on the piston and cannot therefore be used with sensors.
- Installation: a wide range of stainless steel and surface-treated fasteners is available.
- Mounting position: any

- Operating environment: To ensure the longest possible service life and trouble-free operation, use dry, filtered compressed air complying with quality standard ISO 8573-1:2010, class 3.4.3. This standard specifies a dew point of +3°C for indoor operation (a lower dew point should be selected for operation at lower temperatures) and is in line with the air quality provided by most conventional compressors with a standard filter.
- Operating pressure: 10 Bar maximum
- Operating temperature :
- standard temperature from -20°C to +80°C
- high-temperature from -10°C to +150°C (Ø12, Ø16, Ø20 and Ø25mm)
- fluorocarbon outer seals - FPM (fluorocarbon rubber) -20°C to +80°C
- Pre-lubricated: further lubrication is not normally required. If additional lubrication is required, it should be renewed periodically.
- Corrosion resistance: High resistance to corrosion and chemicals.

Documentation française

Documentation française

English documentation

The Parker P1A range of pneumatic cylinders is designed for use in a wide range of applications. The cylinders are particularly suited to light-duty tasks in the packaging, food and textile industries. A hygienic design, the use of corrosion-resistant materials and initial lubrication with our food-grade grease make these cylinders suitable for food industry applications.

Careful design and high-quality manufacturing guarantee long life and optimum economy. Mounting dimensions comply with ISO 6432 and CETOP RP52P, making installation and worldwide interchangeability considerably simpler.