2. /
  3. Products
  4. /
  5. Parker products
  6. /
  7. Pneumatic
  8. /
  9. Pneumatic cylinders - Parker R32-63 series

PNEUMATIC CYLINDERS - PARKER SERIES
r32-63

Parker Hannifin
PNEUMATIC CYLINDERS - SERIES R32-63 / PARKER PNEUMATICS - EUROPE

- International standards: N/A
- Sizes: Ø32, Ø40, Ø50 and Ø63 mm
- Stroke length: 1 to 500 mm
- Versions :
- Double effect
- Double-acting with through rod (without damping)
- Damping : Fixed elastic or adjustable pneumatic damping
- Position sensor: The cylinders are equipped with a magnet for proximity position detection. An optional bracket fixed securely along the cylinder tube allows the mounting of electronic or reed-type sensors, which can be supplied with either a flying lead or a connector.
- Installation:
- Directly via threaded flanges.
- Wide range of steel mounting accessories with corrosion-resistant finish.
- Mounting position: Any

- Operating environment: To ensure the longest possible service life and trouble-free operation, use dry, filtered compressed air complying with quality standard ISO 8573-1:2010, class 3.4.3. This standard specifies a dew point of +3°C for indoor operation (a lower dew point should be selected for operation at lower temperatures) and is in line with the air quality provided by most conventional compressors with a standard filter.
- Operating pressure: 1.0 to 10 Bar
- Operating temperature: Standard temperature from -10°C to +70°C
- Pre-lubricated : Subsequent lubrication is not normally necessary. If additional lubrication is required, it should be renewed periodically.
- Corrosion resistance: Good corrosion resistance.

Documentation

Documentation française

The Parker R32-63 pneumatic cylinder range in sizes Ø32, Ø40, Ø50 and Ø63mm is a lightweight aluminum cylindrical cylinder available in double-acting and double-acting through rod versions. With a corrosion-resistant design, including stainless steel rod, aluminum flanges and anodized aluminum body, it has been developed to meet the most demanding requirements.

Proven sealing technology for standard temperatures from -10°C to +70°C and quality materials ensure high performance, reliability and long life. Available with pneumatic damping for high speeds and short cycle times, they offer a cost-effective solution for a wide range of applications.